I AM DISPERSING MOST OF MY COLLECTION OF CAMPAGNOLO AND OTHER COMPONENTS AS IN THE CATEGORIES ON THIS STOCK LIST. FOR DETAILS OF MY ITEMS AND POSTAGE COSTS, I CAN BE CONTACTED PREFERABLY BY EMAIL AS ON PAGE HEADERS. MY PHONE IS NOT MANNED 24/7

IF I DO NOT HAVE THE ITEM YOU SEEK, TRY TONY SIMMONS AND YOU WILL FIND WHAT IS NOW HIS STOCK BELOW THE RED BAND AT END OF MY OWN ITEMS ON THIS PAGE

CAMMARQUE
60s-90s Lightweight Cycle Components
Tony Simmons  email:
cammarque68@gmail.com
Sales list available by email
Updated regularly

Categories

RECORD/NUOVO RECORD/SUPER RECORD


  • Nuovo Record Superleggeri Strada pedals
    NOS
    £245.00


  • Nuovo Record Superleggeri Strada pedals NOS boxed, COMPLETELY BLACK ANODISED!
    the alloy bodies, normally silver, have been black anodised together with the frames.
    £245.00


  • Seatpost 2 bolt 27.4mm 180mm long

    £95.00


  • Nuovo Record Pista headset French thread 25×1

    £150.00


  • CAMPAGNOLO 151bcd chainrings 47t, 48t, 49t x 3/32″ NOS

    £70.00 EACH


  • Chainring: Super Record 43t
    NOS
    £65.00


  • Chainrings: Super Record 54t. Nuovo Record 46t
    NOS
    £50.00


  • Campagnolo chainring 144bcd 53t, panto logo above each bolt hole: GRANDIS of Verona
    or whatever 'G' you want it to be
    £65.00


  • Chainring: Pista 1/8″ 144bcd 56t-reinforcing shoulder below the teeth, for motor paced events?

    £220.00


  • Campagnolo rubbers for gear levers/qr skewer levers
    midnight blue or grey available. Two rubbers of one colour NOS
    £24.00


  • An outwardly normal appearance pair of Nuovo Record small fl qr hubs 32/32.
    However the front is 90mm OLN and the flanges 63mm. It is a particular machined item not juggling slim locknuts. Rear is usual 126mm OLN, IT thread NOS boxed
    £245.00


  • Campagnolo Record front mech #1052/1, band on for 28.6mm std steel seat tube, NO lip on leading edge of cage, WITH cable stop on body for use with short outer casing to stop on downtube NOS

    £250.00


  • SUPER RECORD Strada smooth unfluted RIGHT crank only 172.5mm [11] black etched logo

    £100.00


  • Campagnolo COMPACT 7s freewheel body, repeat COMPACT, NOS

    £125.00


Back to Top

C-RECORD


  • Chainset Century finish 167.5mm, 42/53
    INCLUDING C-Record BB set alloy cups ITAL thread 111mm axle boxed
    £530.00


  • Front hub large flange Century finish 28h NO skewer

    £220.00


  • Strada rear hub large flange Sheriff Star Century finish 36h BSC 126mm OLN NO skewer

    £295.00


  • Strada small flange hubs w/skewers 36/36 ITAL thread 126mm OLN PAIR

    £300.00


  • Strada rear hub small flange 28h ITAL thread 126mm OLN with skewer

    £130.00


  • Strada Rear hub large flange Sheriff Star 28h ITAL thread 126mm OLN NO skewer

    £295.00


  • PISTA rear hub small flange 24h BSC, 32h FR with nuts & lockring

    £110.00


  • PISTA rear hub small flange 32h with nuts & lockring FRENCH thread together with Camp 16t alloy fixed sprocket with matching FR thread
    as pic plus Camp fixed sprocket
    £140.00


  • PISTA rear hub large flange Sheriff Star 24h BSC, 36h FR with nuts & lockring

    £240.00


  • NJS KEIRIN approved large flange Sheriff Star rear hub 36h. flange, tracknuts, lockring all stamped NJS

    £400.00


  • Pair of Campagnolo C-Record wingnuts for qr skewers NOS

    £50.00


  • C-Record alloy BB cups & lockring BSC thread 1.370×24

    £70.00


  • STRADA RIGHT crank only, SILVER finish 165mm, 172.5mm with self-extracting bolt

    £150.00


  • Front mech band on 28.6mm with a/key cable anchor and chain lift pressings

    £120.00


  • Front mech braze on with 8mm hex head cable anchor, no chain lift pressings in cage

    £120.00


  • Campagnolo gear cable adjuster sits in cable entry on mech, late 1980s used in conjunction with Syncro shifters
    also have 6sp yellow insert for Syncro shifter @ £5
    £25.00


  • Aero seatpost 27.4mm 180mm long

    £150.00


  • Biodinamica 500ml aero bottle & cage

    £110.00


  • Cage for Biodinamica bottle
    spare cage as in adjacent pic for Biodinamica bottle
    £25.00


  • Biotermica thermal bottle and cage, keeps drinks hot/cold as required
    NOS boxed
    £140.00


  • Record SGR pedals (sgancio rapido), the first Campa clipless pedals complete with cleats & fittings, boxed

    £170.00


  • Bulb pump and hose for CAMPAGNOLO ELECTA saddle NOS

    £25.00


  • TANDEM CRANKS CROSS-OVER DRIVE for front/single ring. Chainwheel side has LH pedal thread and left crank has RH thread, pair 170mm cranks

    £140.00


Back to Top

VARIOUS MECHS AND COMPONENTS


  • CAMPAGNOLO CAMBIO CORSA the full set: frame dropouts NOS, two rods changer, pair 3 piece hubs 36/36, spoke disc. CAM49 on a rear locknut, open C skewer to front hub

    £975.00


  • CAMPAGNOLO SPORT CHAINSET 170mm STEEL cranks unblemished chrome plate, 42/52 alloy rings NOS boxed

    £425.00


  • CAMPAGNOLO EUCLID small flange rear hub with solid axle & Campa track nuts 36h IT 126mm OLN

    £75.00


  • CROCE d’AUNE RIGHT crank only 170mm, 172.5mm no self extracting bolt

    £95.00


  • TRIOMPHE large fl qr hubs w/skewers 32/36 126mm OLN FR thread

    £285.00


  • Victory large fl qr hubs with skewers 32/32h 126mm OLN rear IT thrd
    front has raised centre/oiler clip on barrel; may be Euclid?
    £295.00


  • Victory large flange rear hub 32h IT, 36h FR all 126mm OLN

    £125.00


  • Victory rear mech

    £85.00


Back to Top

THE ERGOPOWER ERA


  • Record BB cartridge carbon centre, ITAL thread 111mm axle #RE-11IT
    in sealed box
    £80.00


  • Record double chainset 170mm, 177.5mm 39/52, 39/53 10sp silver for sq taper axle 2003
    boxed
    £220.00


  • RECORD PISTA chainset, shield logo style appears late 1980s to late 90s, 175mm cranks 48t x 1/8″ Campa ring
    Axle bolts & dustcaps in sealed packet
    £250.00


  • Record front mech 9sp band on 28.6mm, 32mm all silver

    £85.00


  • Record front mech 9sp RECORD on arm braze on
    boxed
    £60.00


  • Record 9sp chain #CN99-RE09

    £20.00


  • Record clipless pedals white with dial wheel on back, 1996 cat. #PD-22REQR

    £130.00


  • Record seat tube clamping collar for 31.8mm frame

    £8.00


  • Brake levers bar end fitting, black anodised alloy #BL12-CRCGA pair
    pair Camp cables pack included
    £55.00


  • Campagnolo under BB gear cable guide with bolt & washer
    this is the metal guide not plastic
    £15.00


  • Jockey wheels 8sp #RD-RE500 pair

    £25.00


  • Cassette lockrings: 8sp #CS-001V 29mm thread. 9/10sp #CS-401 27mm thread
    price each
    £10.00


  • Hub bearing cup fits front & rear #HB-RE124. Fits Eurus, Neutron, Record, Shamal, Zonda

    £15.50


  • Dustcover for Campa front hub as in current Pista #HB-RE739

    £2.00


  • Oiler hole clip for current Pista hubs #HB-RE002

    £3.50


  • Upper clamp threaded; lower clamp with 0.5mm serrations for 2004 onwards seatpost & clamping bolt, washer, collar

    £79.00


  • Chorus headset 1998 threaded 1″ BSC

    £90.00


  • Chorus headset 1″ Threadless NOS but incomplete
    missing the 2 ball races and rubber gasket around crown race - does have 2 top caps & star washers
    £30.00


  • CHORUS BB cartridge BSC 102mm axle #BB99-CH02BC
    in sealed box
    £69.00


  • Chorus 10sp chainset 170mm 39/52 all silver alloy for sq taper axle 2003
    boxed
    £190.00


  • Chorus front mech braze on CHORUS 10sp on arm alloy/chrome

    £55.00


  • Chorus front mech 10sp band on 28.6mm or 32mm

    £55.00


  • Chorus 9sp chainset 170mm 39/53 all silver alloy for sq taper axle
    boxed
    £150.00


  • Chorus 1998 RIGHT hand 9sp Ergo shifter with alloy handles, no cutout in tab of gear lever

    £130.00


  • Chorus front mech CHORUS on arm braze on or band on 28.6mm all silver finish
    8sp 1996, 9sp 1997 same item
    £55.00


  • Chorus rear mech 9sp short cage all silver 2001>> #RD01-CH209

    £140.00


  • Chorus brake calipers all silver pair #BR-22CH 1996
    96 label on box
    £140.00


  • Chorus ‘D’ brake calipers all silver pair 2006

    £130.00


  • Chorus front hub 36h with skewer #HB-00CH 1996
    96 label on box
    £60.00


  • Chorus front hub 36h with skewer specific front hub to 1999 99 on box

    £60.00


  • CHAMP Triple front mech braze on
    in sealed poly package
    £35.00


  • Veloce rear mech 9sp short cage all silver 2001>> #RD02-VL209

    £60.00


  • Veloce rear hub 9/10sp all silver FH07-VE with Chorus 1999 front hub HB99-CH – together to make pair of 32/32

    £100.00


  • Veloce 9sp cassette 14-28
    in sealed box
    £45.00


  • VELOCE 8sp down tube braze on shifters #SL-11SVLCG 1995-97
    The boxed set at top in pic. Several buyers have converted these to 10sp by using SL-RE319 insert
    £60.00


  • Veloce/Mirage BB cartridge, steel end cups Ital thread 111mm axle
    top unit in pic, one left in stock
    £17.00


  • MIRAGE front mech 9sp braze on or 32mm band

    £17.00


  • Mirage rear mech 9sp short cage wording embossed on parallelogram pre-2000

    £65.00


  • Mirage dual pivot brake calipers black pair

    £35.00


  • Brake cables current product black with Campa printed along outers: 2 inner wires & 2 outer casings

    £20.00


  • Ergo gear cables Campa #113425.2: 2 inner wires & 2 lengths black casing plus pair black resin cable stops all in sealed packet

    £20.00


  • Gear cables for bar end shifters Campa #1134105: 2 inner wires 2m long & 2 black outers 600mm, 1 short outer

    £20.00


Back to Top

RIMS FOR WIRED-ON TYRES/CLINCHERS priced as PAIRS of same drilling = 2x32h, 2x36h etc unless stated as One Rim Only

The word BLACK is used advisedly to indicate the rim is not silver. It may actually be dark grey/anthracite/charcoal or even black but it wont be silver

  • CAMPAGNOLO GAMMA silver 32h
    SOLD IN PAIRS = TWO RIMS 32h
    £75.00


  • Campagnolo GAMMA black 32h
    SOLD IN PAIRS = TWO RIMS 32h
    £75.00


  • Campagnolo OMEGA 19 black 36h
    SOLD IN PAIRS = TWO RIMS 36h
    £100.00


  • Campagnolo OMEGA 6082 ALLOY T6 black 20mm wide 32h
    SOLD IN PAIRS = TWO RIMS 32h
    £100.00


  • Campagnolo MIROX silver 36h ATB 26″
    SOLD IN PAIRS = TWO RIMS 36h
    £65.00


  • Campagnolo ZARK silver 36h ATB 26″
    SOLD IN PAIRS = TWO RIMS 36h
    £65.00


  • Campagnolo ZARK black 32h, 36h ATB 26″
    SOLD IN PAIRS = TWO RIMS 32h, TWO RIMS 36h
    £65.00


  • Campagnolo K2 silver 32h ATB 26″
    SOLD IN PAIRS = TWO RIMS 32h
    £75.00


  • MAVIC CXP21 V section BLUE 32h
    SOLD IN PAIRS = TWO RIMS 32h
    £55.00


  • Mavic CXP21 V section RED 36h
    SOLD IN PAIRS = TWO RIMS 36h; SAME SECTION AS BLUE RIM PIC
    £55.00


  • Ambrosio BALANCE black with silver walls 36h
    SOLD IN PAIRS = TWO RIMS 36h
    £65.00


  • Campagnolo Omega 19 black 36h
    I have one 'surplus' rim available = in excess of above pairs
    £50.00


  • Mavic single eyelet black w/silver walls 32h poss Open Sport? ONE RIM ONLY

    £30.00


  • Mavic Open Pro SSC black gloss finish 28h ONE RIM ONLY

    £55.00


  • Mavic G40 27″ x 1,1/4″ dark 40h
    one rim only
    £55.00


  • NISI black 40h 19mm wide ONE RIM ONLY

    £55.00


  • BIANCHI ELEVATION/AMBROSIO V section black 24h with 24 black spokes-presumably to fit small flange hub
    19.5mm wide, 28mm high. ONE RIM ONLY
    £20.00


Back to Top

RIMS FOR TUBULARS/SEW-UPS priced as PAIRS of same drilling = 2x32h, 2x36h etc unless stated as One Rim Only

The word BLACK is used advisedly to indicate the rim is not silver. It may actually be dark grey/anthracite/charcoal or even black but it wont be silver

  • CAMPAGNOLO RECORD CRONO silver 36h
    SOLD IN PAIRS = TWO RIMS 36h
    £230.00


  • Campagnolo SIGMA CRONO OXIDE silver 28h, 36h
    SOLD IN PAIRS = TWO RIMS 28h, TWO RIMS 36h
    £120.00


  • Campagnolo SIGMA 7075 dark 36h
    SOLD IN PAIRS = TWO RIMS 36h
    £120.00


  • Campagnolo LAMBDA STRADA silver 36h decals as 1995 cat.
    SOLD IN PAIRS = TWO RIMS 36h
    £85.00


  • Campagnolo OMEGA V black 24h
    SOLD IN PAIRS = TWO RIMS 24h
    £70.00


  • Campagnolo Sigma 7075 dark 36h decals as 1995 cat.
    ONE RIM ONLY 36h
    £60.00


Back to Top

SPARES


  • Campagnolo pin badge, 25mm long
    secured by butterfly clip
    £10.00


  • Mapei Quick Step pin badge
    24mm high
    £10.00


  • Adjuster screws springs & metal caps for long forkends-lower jaw 38mm+/- & 4 mudguard bolts + washers in sealed bag. plastic wingnut caps on request

    £10.00


  • Adjuster screws springs & metal caps for long forkends
    FIVE pairs as job-lot
    £25.00


  • Campagnolo brake lever hoods Cobalto flared shape white pr
    on left in pic
    £30.00


  • Campagnolo ErgoPower hoods for 8s/early 9s pointed top #EC-RE500 pr

    £30.00


  • Wheel guides for DELTAS black PVC coating set of 4

    £20.00


  • Alloy adjuster wheel for DELTAS with knurled edge=no rubber ring required

    £8.00


  • Domed nut for main brake spindle – this is a stainless repro nut

    £2.00


  • Campagnolo 50th Anniversary nuts for brake centre spindle
    per pair
    £50.00


  • Brake centre spindle rear nut fitting or will suit a/key front #2012/1

    £23.00


  • Brake centre spindle short rear for allen key

    £23.00


  • Brake centre spindle DROP BOLT length for nut fitting rear, may not be Camp as not stamped-missed the machine that day? but is identical profile to #2012/2

    £50.00


  • One rear brake centre bolt and one cable clamp pivot bolt each complete with washers, pointed nuts, cable clamp bolt and plate for Chorus Monoplaners, sold together NOS

    £38.00


  • Allen key sleeve ‘nut’ to secure rear brake to certain patterns of rear bridge. Regular 6mm thread, accepts 6mm a/key
    I had a Gios Professional that used this type, must be other brands out there?
    £5.00


  • Brake spring fit GS/NR/SR #2011

    £18.00


  • Brake arm with CAMP BREV INT standard drop #2019 or piccolo/shallow #2019/1
    #2019 standard drop at top in pic
    £25.00


  • Brake inner wires original thick 1.8mm wire < C > on nipple TWO FRONTS for

    £5.00


  • Nuovo/Super Record LEFT gear lever
    NOS price each, no RH available
    £12.00


  • Gear levers Left & Right later pattern engraved wording
    NOS price per Pair
    £15.00


  • Outer casing pearl white CR era, chainstay stop to rear mech
    also silver/grey as pic
    £10.00


  • Campagnolo cable ferrules – 1 with nose/stepped, 1 plain
    5mm inner diameter for stainless casing etc
    £10.00


  • Campagnolo gear hangers for NR/SR/GS on Left in pic; Valentino/early Rally on Right
    #80/2 = NR/SR/GS. #80/A = VALENTINO/RALLY 1st gen.
    £28.00


  • A front/outer plate for the original 1963 Record rear mech, if youre feeling brave enough to dismantle & rivet in place, this is NOS

    £25.00


  • Top mounting bolt-titanium-to dropout for Super Record rear mech #7350042

    £45.00


  • Campagnolo gear cable adjuster sits in cable entry on mech, late 1980s used in conjunction with Syncro shifters
    also have 6sp yellow insert for Syncro shifter @ £5
    £25.00


  • Jockey wheels grey or black for CR rear mech-these are just the toothed wheel #2302007, NO cones/balls/outer covers pair

    £24.00


  • C-Record outer jockey cage plate

    £25.00


  • Jockey cage outer plates – Athena, Croce d’Aune SM, Record

    £25.00


  • Band on body for NR/SR front mech #1143029
    from top: NR, SR with smaller points, NR parallel band
    £25.00


  • Nuovo Record steel top nut for headset #681 BSC

    £25.00


  • NR Pista/GS fork crown race #690 (/A)
    same outer diameter for NR Pista or Gran Sport race
    £25.00


  • NR Strada fork crown race #686

    £25.00


  • NR steel top nut for headset 25×1 French thread & spacing washer with flat inside

    £25.00


  • Super Record alloy top nut for headset #4042 BSC thread

    £35.00


  • SR Strada upper headtube race #4045

    £10.00


  • SR top nut + alloy spacing washer + Strada screwed race (3 items) 25×1 FRENCH THREAD

    £70.00


  • SR alloy spacing washer with flat inside for FR column, get machined for IT/BSC?

    £15.00


  • C-Record dogged washer fits between top nut & race for 1″ steerer

    £4.00


  • CR screwed race for larger 3/16″ balls BSC or IT thread

    £45.00


  • CR upper headtube race for 1″ headset larger 40.5mm OD for 3/16″ balls #7133086

    £10.00


  • CR Pista alloy screwed race for headset IT thread, this is the smaller OD race for 5/32″ balls

    £45.00


  • CR Pista upper headtube race #7133045 for 5/32″ balls
    measures 37.9mm at outer flange
    £10.00


  • CR fork crown race for Pista 1″ headset, stamped NJS, 37.75mm OD, #7133075
    NJS stamp is at top of RH race
    £25.00


  • CR alloy top nut for headset 25×1 French thread & spacing washer with flat inside

    £25.00


  • Campagnolo BB cups: C-Record alloy right hand ITAL thread @ £35; NRecord steel thick wall left/adjustable ITAL thread @ £15. Both are NOS
    ALSO: NRecord steel thick wall left/adjustable ITAL thread With lockring @ £28


  • Campagnolo BB lockring 1.370×24 BSC thread

    £20.00


  • Campagnolo BB axle overall length 115mm, for Italian shell 70-C-120 or for BSC shell 68-C-120, from distance between bearing shoulders I suggest they are for use with thin wall cups, both are NOS

    £45.00 each


  • BB axle Nuovo Record 68-SS-120 112mm overall length

    £45.00


  • C-Record BB balls in resin cages-pair in red plastic pot

    £15.00


  • Super Record 3/16″ ball cages for titanium BB axle
    pair in plastic pot
    £25.00


  • Bolts & washers=two of each, crank to axle 15mm hex head Patent Camp

    £22.00


  • PATENT CAMPAGNOLO crank caps – NOS
    price per pair
    £40.00


  • Record crank dustcap #FC-PI001
    as fitted to 2nd gen. Super Record through to current Pista
    £14.00 each


  • Set of five Campagnolo Triple chainwheel bolts & spacers part nos. 830,831,832. For use with NRecord 144bcd triple chainset or for securing cyclocross discs to a single ring NOS

    £80.00


  • Set of five Campagnolo Triple chainwheel bolts #818 – these screw into the 5 arms of RH crank #819
    36t was only ring that Camp made for this, five bolts on right secure ring to posts
    £80.00


  • Nuovo Record pedal spindles, standard 9/16″ x 20tpi pair
    One spare Left spindle available £25
    £50.00


  • Toeclip mounting screws & ‘arrowhead’ alloy plates for CR pedals-sealed pkt includes pr toestrap buttons

    £20.00


  • Toeclip mounting screws and stepped alloy plates for Triomphe pedals-sealed pkt includes pr toestrap buttons

    £20.00


  • Front pedal plates silver-two + four bolts/washers for C-Record Ergonomic pedals

    £30.00


  • Pair of Campagnolo pedal plates for C-Record ‘aero’ and Ergonomic pedals
    top pair for aero style, lower pair for Ergonomic - price per pair
    £45.00


  • Campagnolo C-Record pedal dustcaps – these are alloy not plastic
    price per pair
    £40.00


  • Campagnolo toestrap end buttons with shield logo grey pair

    £8.00


  • Campagnolo open C skewer lever, very early piece of non-standard dimensions – NOS
    the shank measures 7.48mm and the top rim 9.98mm, both larger sizes than conventional hole in skewer rod & end cap
    £125.00


  • Campagnolo design ‘dogbone’ wingnuts for very early qr skewers
    may or may not be originals, they are unused, I found them in IT - price per pair
    £45.00


  • Campagnolo 6sp skewer complete NOS, believed to be Croce d’Aune

    £35.00


  • Record 5sp Rear qr bare axle #29 130mm+/- long
    Also Front qr bare axle #19 108mm+/- long
    £10.00


  • Rear axle spacer alloy 4mm to 13.5mm
    various widths as labels or ask! 4mm loose on left in pic. 5mm & 7.5mm sold.
    £5.00


  • Record Pista front solid axle 138mm regular overall length #HB-PI001

    £30.00


  • Campagnolo seatpost lower side support RIGHT #702
    Right side as you are sat on bike
    £25.00


  • Ball bearings 3/16″ GIULIET Made in Italy on bulk carton, per 100

    £5.00


  • Bolt 609/1 & nut for lever band/cable guide

    £5.00


  • Pump cup (mushroom) #632

    £20.00


  • Rear gear cable tunnel with cable stop on left for short outer casing of fr.mech #626
    may not be NOS but is very clean condition
    £35.00


  • Single downtube stop for short outer casing of front mech #628
    NOS
    £35.00


  • Pump head UK type with male thread #1030

    £20.00


  • Pump head with 7mm male thread for French pumps #1030/3

    £20.00


  • Pump head plastic with female thread #3346

    £10.00


  • Campagnolo dropouts #1010/B, RH rear tapped for mounting the Portacatena, the two screw set #0100006 of chain support, RH lever with release button & backplate is included

    £90.00


  • Campagnolo Pista frame dropouts 2 fronts, 2 rears #1053

    £70.00


  • A chain hook clip-to-chainstay part# 40 & 41 to the Paris-Roubaix rod type gear change.
    A small item habitually discarded no doubt when the changer was removed from a frame. This clip is 60yrs old and NOS
    £50.00


  • Pin for chain rivetting plier #7281409
    may be suitable for replacement pins on LH BB cup tool as both are same thread
    £2.50


  • Puller for the tapered alloy dustcaps on ends of C-Record hubs

    £110.00


  • Campagnolo crank bolt & Pista hub nut spanner #769
    NOS in packet
    £80.00


  • Campagnolo crank bolt spanner #769 and crank extractor – USED ITEMS GWO

    £45.00


  • Campagnolo crank bolt & Pista hub nut spanner #769, this one has the very early signature and globe logo stamping rather than Brev Inter Campa. USED

    £90.00


  • Campagnolo ‘Q’ hub cone spanners 13mm/14mm, USED but the jaws are not marred
    the early style stamping CAMPAGNOLO up to cat.16 - no patterned background
    £50.00


Back to Top

CINELLI HANDLEBARS AND STEMS ~ ALL 26.4mm CENTRE FERRULE/CLAMP DIAMETER UNLESS NOTED AS 26mm 


  • Cinelli handlebar silver single cable groove 64-40 26.4mm centre ferrule
    last one
    £40.00


  • Handlebar silver single cable groove 66-42 Campione del Mondo (aka Merckx)
    last one
    £85.00


  • CINELLI handlebar silver 68-42 ‘TOUR’ appears to be identical shape+/- to mod.66, NO grooves 26.4mm ferrule
    not in any Cinelli cats, that I have
    £90.00


  • Handlebar TOP ERGO 64-40 double cable grooves. 7075 alloy blue/grey anodised. These bars have normal curves, no anatomic angles
    Front in pic: 64-40
    £40.00


  • Handlebar plugs with winged C logo BLACK pair
    Black available. Chrome & gold sold out.
    £3.00


  • PINOCCHIO stem 135mm, 140mm

    £40.00


  • PINOCCHIO stem 125mm, 140mm 26mm CLAMP

    £40.00


  • OYSTER WITH HINGED/OPENING BAR CLAMP silver 140mm

    £50.00


  • SESAMO 1″AHEAD STEM black/silver 120mm. 26mm CLAMP
    with top cap & bolt
    £38.00


  • PVC coloured inserts for XA, XE stems eight pieces in pic for £12
    Dedacciai logo - cap for stem? at bottom in pic £15


Back to Top

3TTT HANDLEBARS AND STEMS


  • 3TTT handlebar GIMONDI 40 with ALMARC sewn-on BLACK leather covering, brake lever bands fitted

    £120.00


  • 3TTT handlebar smoke grey single groove Competizione model MERCKX/MEX42, also have one MEX42 SUPER COMPETIZIONE
    42cm measured outside>outside. MEX42 at rear in pic
    £40.00


  • STATUS stem smoke grey 125, 130, 140mm
    boxed
    £30.00


  • QUID same forging as Status but silver 120mm

    £30.00


  • PISTA #2 sloping stem silver 120mm panto BOERIS

    £85.00


Back to Top

FROM OTHER MANUFACTURERS


  • BROOKS SWALLOW LEATHER SADDLE. I have a recollection that under pressure from CTC in 1990, Brooks manufactured a limited run of Swallow saddles
    NOS boxed
    £200.00


  • Selle Italia Novus red with yellow centre strip

    £100.00


  • Selle Italia Novus Ferrari black with grey centre strip, Ferrari badge on nose & back

    £200.00


  • A Selle Italia DUAL saddle, the nose is spring loaded and slides forwards and down
    to clear
    £50.00


  • EVEREST chain with slotted side plates silver
    silver available no gold
    £95.00


  • Regina CX-S chain, specially shaped inner-facing link plates to aid smooth shifting
    NOS boxed
    £95.00


  • YABAN chain silver very unusual shaped links suits 5-8sp

    £25.00


  • ALE chromed steel toeclips mod.ALPI, size Medium NOS in packet

    £25.00


  • Toestraps ALFREDO BINDA pair red….or red

    £45.00


  • CHATER-LEA chromed steel chainring 1″ pitch x 3/16″ with 24t NOS may have minor shop wear from sitting on a shelf for over 50 years

    £60.00


  • FiR double chainwheel bolts quality chrome plate will fit any double rings set of 5
    Either FIR monogrammed heads or plain, secured by 4mm a/key in reverse side as on right
    £15.00


  • FiR crank dustcaps silver alloy, will fit Campa cranks pair

    £10.00


  • FT BOLOGNA mis-packed in factory = 70-S-120 ITAL width 115mm axle but sent out with BSC cups
    The axle with bearings fitted & end bolts £45. Pair BSC cups with lockrings + spare pair l/rings £45
    all NOS items


  • DIA-COMPE brake lever hoods for external cables will fit Campa Nuovo/Super Record, GPM, Galli etc brown, black ideal for regular use bike being PVC & cheap!

    £10.00


  • Galli brake lever hoods gum, will fit NR/SR pair

    £27.00


  • GALLI rear mech, nice black/silver alloy product copy of Super Record

    £100.00


  • Gipiemme chainring: PISTA 1/8″ 144bcd 49t

    £35.00


  • Gipiemme chainring: PISTA 1/8″ 144bcd 49t with reinforcing shoulder below teeth as vintage Campa

    £55.00


  • Various chainrings fit NR/SR 144bcd Gebhardt 44t. TA 46t, 48t. SR Royal 52t, 53t, 54t
    all 144bcd, all @ one price
    £10.00


  • ITM ECLYPSE Stem Ti finish 100mm

    £40.00


  • MAVIC 571 cassette rear hub with skewer 32h, body accepts Mavic sprockets

    £40.00


  • MICHE pedal dustcaps, will fit Campa pedals – same thread and serrated spanner
    price per pair
    £20.00


  • MODOLO hinged jaw/opening handlebar stem black 95mm
    the black stem in pic is available
    £36.00


  • Modolo 919 brake lever hoods clear = transparent

    £30.00


  • Modolo brake block rubbers for KRONOS these are handed L/R, so 2 of each

    £25.00


  • Ofmega double chainwheel bolts set 5 NOS

    £20.00


  • OFMEGA large flange rear hub plain undrilled flanges 36h
    126mm OLN solid axle 10mm diameter
    £20.00


  • REG cable clip #749 white plastic holds 2 brake cables together above stem

    £5.00


  • ROYCE rear hub 24h 126mm OLN – NOS
    no skewer
    £100.00


  • Simplex jockey wheels with ball bearings not bushes pair

    £20.00


  • Simplex double downtube cable stop #3604L

    £20.00


  • Simplex Demultiplicator Relais for use with h/bar control #3637L see pic on velobase

    £50.00


  • Simplex chainstay stop for gear outer casing #2112

    £5.00


  • Stronglight BB axle with end bolts 125mm long

    £20.00


  • Stronglight double chainset bolts set of 5 also fit Campa etc

    £5.00


  • Stronglight triple chainset bolts & spacers set of 5

    £7.00


  • TA Anquetil Piste shoeplates pair NOS
    inc large number of nails
    £15.00


  • TANGE LEVIN headset chrome plated steel 1″ resembles NR Pista
    on LEFT in pic
    £20.00


  • UNIVERSAL brake hoods for mod.68 levers gum with gum conical adjuster rubbers

    £45.00


  • Weinmann rear centre-pull brake cable hanger with adjuster fits on seatlug bolt, long V shape £15.
    on left in pic = Weinmann mounting bolt for front centre pull brake £5


  • Williams chainring 52t 144bcd NOS
    Williams rings are usually associated with 151bcd but they started producing 144 rings late 1960s
    £25.00


  • Expander bolt & cone for stem 7mm diameter, 184mm long with 60mm of thread, 10mm hex head; not a thrilling item but increasingly hard to find when you want one

    £6.00


  • OUTER CASING/HOUSING for brake cables original FLUTED surface mid/grass green colour
    If you wish to check the colour, send me some stamps I will mail you a sample piece
    £5.00 per metre


  • CYCLO pump peg with flat peg like Campa one only

    £5.00


  • BENOTTO non adhesive ‘bar tape: red, blue, 2 rolls for one ‘bar with 2 end plugs in packets

    £6.00


  • Handlebar plugs black rubber with screw expander £3 pair
    Benotto all sold


  • A dead ringer saddle for Campagnolo Electa. I am reliably informed by an Italian gent that Fugazzi invented this saddle and Campa either bought the design or the entire company
    with bulb pump USED
    £195.00


Back to Top

SHIMANO DURA-ACE~MOSTLY 7400 SERIES AND SUNTOUR


  • Dura-Ace cartridge headset #HP-7410 1″ BSC
    suits low stack height of 37.6mm if your fork column is rather short
    £50.00


  • Chainring silver: 41,43,44,48t

    £22.00


  • Chainring black: 44,45t

    £22.00


  • D-A gear cables £4 per pair
    OR £12.00 bag of 10


  • Brake levers 105 pair with white hoods, silver cables & notched covering for under bar tape all in sealed pack

    £65.00


  • Rear hub large flange 36h 126mm OLN solid axle 3/8″ diameter 1970s?

    £20.00


  • Rear hub large flange 36h 126mm OLN solid axle 3/8″ diam #HB-MN72 superior finish

    £25.00


  • Huret, SunTour gear cable guides
    Huret double cable rollers, Huret cable guide & downtube stop, SunTour cable guide & downtube stop
    £10 each


  • Suntour brake levers for ATB/flat bars neat compact design, model unknown

    £35.00


Back to Top

ITEMS AVAILABLE FROM CAMMARQUE

I DO NOT POSSESS THE COMPONENTS SHOWN BELOW THIS BAND. YOU SHOULD CONTACT BY EMAIL cammarque68@gmail.com WHO CAN HELP SUBJECT TO AVAILABILITY

  • Toeclips chromed steel Medium, Long


  • Toeclips chromed steel Short with NJS Keirin approved stamp underneath


  • PISTA BB set Ital thread NR thick wall cups with GIPIEMME SPECIAL PISTA axle 109mm


  • Pista headset IT thread


  • Strada headset BSC & IT thread


  • CAMPAGNOLO NUOVO RECORD chainset 180mm cranks 42/53 PATENT stamped rings, ring bolt heads & crank caps
    45+? years old stamped on reverse 180 STRADA (no code)


  • Chainring: 42t


  • Chainring: 44, 46t


  • Chainring 151bcd PISTA 1/8″ x 47t with the reinforced thick shoulder below teeth
    note 151bcd, is in original paper envelope with the old Corso Padova address


  • Brake levers with white hoods shield logo


  • Brake levers with gum hoods shield logo


  • Brake levers with gum hoods GLOBE logo


  • Nuovo Record brakes set, deep drop nut fitting to frame, flat qr levers, steel brake shoes, Globe logo hoods
    silver-grey cables under cardboard mount


  • PISTA large (high) flange hubs 32/40 with nuts & lockring pair
    OLN: 100mm Front, 120mm Rear


  • PISTA large flange rear hub 28h 110mm or 120mm OLN=Over Lock Nuts
    110mm OLN at top of pic


  • Large flange quick release FRONT hub with skewer 36h


  • Small flange quick release hub REAR only 28h, 32h 126.5mm OLN
    BSC, ITAL threads available, complete with skewer


  • Toeclips alloy Short, Medium


  • Toeclips chromed steel 50th ANNIVERSARY logo & signature MEDIUM


  • Down tube double levers – earlier style with raised wording, braze on or band on


  • Down tube braze on double levers


  • Down tube band on double levers


  • Portacatena set: lever with release button and support for chain-1 screw pattern for any dropout


  • Portacatena set for Camp dropouts with the 2 tapped holes
    comprises RH lever with release button and particular lever backplate, chain support & screws, standard Left gear lever to match


  • Front mech band on with four cutouts to face of chain cage
    top mech in pic


  • Strada smooth unfluted cranks chainset complete, black etched logo 165mm, 177.5mm choice of chainrings: 42, 44, 45, 52, 54t


  • Pair of CAMPAGNOLO SUPER RECORD STRADA cranks 165mm both have [32] on reverse NOS


  • Strada FLUTED LEFT crank only 167.5mm


  • Strada smooth unfluted LEFT crank only 167.5mm


  • Pista smooth unfluted LEFT crank only 165mm, 170mm


  • Record PISTA 1/8″ chainring 47t 144pcd current product


  • Chainring: 44, 47, 55t


  • Seatpost 1st generation 2bolt 26.4mm 180mm long


  • Seatpost 2nd generation single bolt 26.2mm 180mm long


  • Super Record brakes set second gen. shallow drop allen key fitting to frame, alloy shoes, shield logo hoods


  • Campagnolo freewheel spare sprockets: letter G16t. DE14t, DE23t. B16t, B17t. A17t, A18t, A22t.


  • Friction double gear levers braze on, includes optional braze-on boss for top/centre of downtube aero style
    with pair cables & short white outer casing


  • Set of Campagnolo C-Record retro-friction downtube gear levers with all fittings and pair cables with short white outer casing NOS in poly package


  • Rear mech 2nd generation with C cutout in lower cage
    rear mech only


  • Early brake levers as in cat.18bis, plain unribbed handles, shield logo at top, white hoods, can be used external cables or aero:- cable guide plates included


  • Aero brake levers with white hoods, PowerGrade model with a/key +/- adjustment slot, commonly supplied with Delta sets pair


  • C-Record/Chorus/Athena/Victory/Triomphe aero sliding toeclips MEDIUM alloy


  • MULTI-SIZE SYSTEM sliding toeclips to fit CR, Chorus etc, Medium chromed steel, the strap slot at top unclips like a metal watch strap and can be adjusted up/down.


  • MULTI-SIZE SYSTEM regular toeclips Medium or Long chromed steel, intended for Record Ergonomic or TBS but will fit any other standard pedals, adjustable strap slot as above


  • Aero seatpost 26mm diameter x 130mm long


  • Record Strada Front hub small flange 36h with skewer boxed #HB10-RE


  • Record front hub 32h, 36h oversize with a/key collar adjustment,#HB-RE32
    skewer in box


  • Strada Rear hub small flange 32h ITAL thread 126mm OLN NO skewer


  • Strada rear hub small flange Century finish 36h BSC or ISO 126mm OLN; 36h BSC 130mm OLN NO skewer


  • Record chainring 10sp stamped C10 53/39
    Record ring with chain trap pin under one bolt


  • Record chainring OUTER 53t stamped 53/42 1994 on paper envelope
    ring has the sleeve half of 'hidden' bolt installed


  • Chorus chainring OUTER 53t stamped 53/42 1994 on paper envelope


  • Record Titanium rear mech 10sp long cage cf outer arm & cage face 2006 #RD4-REXL


  • CENTAUR front mech 10sp braze on or 32mm band on alloy/chrome


  • Down tube cable stops black resin for Ergo cables pair #EC-AT001


  • Campagnolo OMEGA V black 32h
    Also available: Omega19 black 36h. Omega20 black 32h & 36h


  • Adjuster screws springs & caps for short forkends-lower jaw 28mm+/- pair


  • Campagnolo brake lever hoods for NR/SR levers shield logo white pair
    Ivory/off-white rubber at top in pic or a 'whiter' white PVC below


  • Campagnolo brake lever hoods for aero levers shield logo black pr


  • Two little plates that fit in early aero levers to guide the cable-and frequently drop out-plus two plugs to blank off top hole in hoods 4pcs in sealed pkt


  • Brake block rubbers NR/SR 2 pairs (4 rubbers)


  • Brake block rubbers for DELTAS 2 pairs (4 rubbers)


  • Brake block rubbers #BR-RE600 1998+/- 2 pairs (4 rubbers)


  • Brake adjuster stem & wheel for Nuovo/Super Record caliper
    with white rubber ring to wheel available if required


  • Gear cables current product stainless pair


  • Top mounting bolt to dropout for NR rear mech #166/A


  • The “signet ring” toothed insert that fits between upper body & dropout on Victory, Triomphe and early Athena rear mechs #7116067


  • SR alloy Strada screwed race #4044 Ital thread


  • BB steel cups & lockring pair: thick wall/rifled hole Italian thread


  • Pedal dustcaps chromed plastic GS/NR/SR serrated edge Patent Campa on domed top sold singly/each


  • Toeclip mounting screws for GS/NR/SR 4 screws & 4 washers #676/677


  • Record front q/r axle bare #19


  • Front q/r axle complete with cones, locknuts for Record, Vento, Zonda, Scirocco, Eurus, Proton as in 1998 parts book


  • Front q/r axle complete with cones, locknuts for Chorus, Athena, Veloce 1998+/-


  • Nuovo Tipo 5sp rear q/r axle complete with cones, spacers, & locknuts


  • Record 6sp rear q/r axle complete with cones, spacer & locknuts


  • Campagnolo skewers from various groups: 1990s Record, Chorus, Athena, Nuovo Tipo etc. Fronts and 6sp/126mm OLN Rears
    some levers nutted, some with circlip to end cap. ALL NOS


  • C-Record tapered alloy dust cover fits in end of hubs front, rear each


  • Record PISTA front solid axle bare overall length 128mm = 10mm shorter than usual length, stamped Camp with chromed/domed ends


  • Record PISTA rear solid axle 157mm overall length #29P bare


  • Solid 10mm rear axle 170mm long, useful for Pista hub in 126mm road ends, this is a Camp stamped part possibly #1281


  • PISTA hub tracknuts front #667, rear #668 pair


  • Double gear cable guide clips around downtube above BB #626/A


  • Chainstay cable stop #636


  • Brake cable clips for top tube #649 set of 3 in paper envelope


  • ‘Divers helmet’ chainstay cable stop #621 BRAZE ON


  • Front mech cable guide #626/B BRAZE ON


  • Rear gear cable guide #663 BRAZE ON


  • Gear lever bosses #660 BRAZE ON pair


  • Bracket for f.mech #7102012 BRAZE ON


  • DEDA VELOCITA PISTA steel bars 26mm ferrule, 42cm outside-outside


  • TITAN handlebar stem chromed steel 60mm


  • Cinelli handlebar silver single cable groove 65-44, double groove 66-40, 26.4mm centre ferrule
    from front in pic (64-40), 65-44, 66-40


  • Cinelli 101 stem silver 140mm
    boxed


  • GRAMMO TITANIUM ROAD 130mm unpolished grey finish; 135mm, 140mm polished finish


  • GRAMMO TITANIUM ATB 120mm, 25.4mm BAR CLAMP
    polished finish


  • REGINA RECORD ORO chain with drilled side plates


  • Regina Anniversario chain with shaped inner plates & gold rollers
    in sealed opaque package


  • Regina Super Racing chain silver suits 5-8sp in 1991 cat.


  • Regina 50 America SL chain silver with hollow rivets in red can


  • Regina ORO 5sp freewheel 14-18
    boxed, use 2 dog remover


  • Regina ORO 5sp freewheel mod.BX 14-20, 14-22
    boxed, use splined remover


  • Everest ORO 5sp freewheel 13-17


  • SHIMANO 600 UG 5sp freewheel silver 13-19


  • Regina ORO 6sp freewheel mod.BX 14-20
    boxed, use splined remover


  • Regina TITALL 7speed freewheel 12,13,14,15t sprockets are titanium, 16,17,18t are alloy, BSC thread on box label, probably fit IT. Includes Regina double ended remover NOS boxed


  • Regina AMERICA 1992 7sp freewheel silver 13-21 in green can
    use splined remover


  • Remover splined for Regina BX, CX-S, America freewheels


  • 3.5mm allen key for Delta brakes


  • 5mm allen key with knurled grip #767


  • ‘T’ shape 6mm allen key with 8mm box spanner on end #143/2


  • Pedal cap spanner-serrated edges GS/NR/SR & inner locknut #710


  • Pedal cap spanner-square end CR/Vic & fits CR pulley cone #7130021


  • Clipless pedal bearing spanner 21mm & 11mm #TL-7130034


  • Brake spanner #2025


  • Crank extractor RIGHT hand thread #770 or UT-FC060


  • Camp BB fixed cup/pedal axle spanner #713


  • Rear mech hanger alignment tool #UT-VS030


  • Splined tool for Record/Chorus BB cartridge & cassette lockring #TL-7130036


  • 10sp Chain assembling pliers #UT-CS050


  • ATHENA pedals with Medium steel or alloy toeclips and leather straps


  • Athena aero brake levers silver alloy handles with black hoods pr


  • Chorus/Athena BB set BSC thread cups, 111mm axle


  • Chorus pedals with Medium steel or alloy toeclips and leather straps


  • GRAN SPORT REAR MECH, the original chromed steel/bronze circa 1962, still has the blue card disc retaining top mounting bolt untouched by a chain


  • GRAN SPORT alloy chainset 116bcd rings,170mm,42/52-THIS SET WAS MADE FOR CITY BIKE WITH 13mm CHAINGUARD CLEARANCE BETWEEN BACK OF CRANK AND FACE OF RING. Ital BB, triple axle.


  • Gran Sport headset chromed steel 1″ BSC with Campa 5/32″ loose balls


  • CAMPAGNOLO NUOVO TIPO front hub 40h with flat lever skewer NOS


  • RALLY very long cage rear mech-90mm between jockey wheel centres, late 80s product also known as New Rally


  • VICTORY pedals with Medium steel or alloy toeclips & straps
    choice of toeclips: medium steel with adjustable strap slot; medium alloy. generic toestraps


Back to Top